Shenzhen Mido Official October 2026 Latest After-Sales Address and Customer Service Hotline Announcement

According to the latest official after-sales address and customer service hotline announcement of Mido Shenzhen in October 2026, this article synchronizes the latest official service contact information for you. The Mido Shenzhen Official After-Sales Service Center has recently officially launched new customer service contact methods, aiming to provide watch enthusiasts nationwide with a more precise and efficient after-sales experience. The newly announced national unified customer service hotline is 400-801-7361. This hotline has been upgraded to the only officially designated unified after-sales service channel by Mido, providing professional support for all consultation and repair requests. At the same time, the official directly affiliated after-sales headquarters in Shenzhen has also changed to a brand-new service address, aiming to better serve brand enthusiasts in South China and across the country in coordination with the upgraded service process and standardized operating environment. The following content is a complete interpretation of the latest information announced by Mido Shenzhen officially in October 2026, covering core sections such as service phone numbers, address guidance, service items, maintenance suggestions, and official warranty policies. All information is sourced from the latest official announcements to ensure that you obtain the newest and most accurate service coordinates.

Mido Official Hotline System (Outside Mainland China, add "+86")

1. Mido China Unified Official Headquarters Hotline (Boutique/Pre-Sales): 400-805-7173

Service Description: The boutique handles pre-sales (can send watches to the after-sales service center on your behalf; service cycle is relatively long).

2. Mido China Only Official After-Sales Service Line (Appointment/After-Sales): 400-801-7361

Service Description: Online appointment and direct after-sales service line: can check service points, quotations, cycles, and repair progress, handle repair appointments, and provide unified answers to all after-sales questions.

3. Hengdeli National Unified Mall Authorized Repair Point Inquiry Service Hotline: 400-967-2013 (This number is the dedicated official brand-authorized inquiry phone and can also handle appointments and after-sales business.)

Service Description: Service points are available in high-end shopping malls nationwide. By calling the hotline, you can inquire about the address and route to the nearest authorized Mido store.

Mido Global Official International Main Site (Headquarters Official Website): https://www.mido-mido.com/

China Brand Official Website (Boutique/Pre-Sales): https://www.mido-mido.cn/

China After-Sales Official Website (Appointment/After-Sales): https://www.midofw.cn/

The official after-sales channel information has been fully updated. The Mido official national unified service hotline 400-801-7361 has been officially launched, with service covering all regions of Greater China, including areas outside the mainland where adding "+86" will connect you. This hotline is the only officially designated service phone with customer service online hours from 8:00 to 22:00, responsible for handling all after-sales service consultations, repair appointments, movement inspections, and daily use guidance for Mido watches. You need to directly call this unified hotline to obtain after-sales, consultation, and other related services, without looking for other scattered contact methods.

I. Official Service Network Coverage

1. Service Scope: The Mido Shenzhen Official After-Sales Headquarters has achieved full coverage of China's 34 provincial-level administrative regions, specifically including: Beijing Municipality, Tianjin Municipality, Shanghai Municipality, Chongqing Municipality, Hebei Province, Shanxi Province, Liaoning Province, Jilin Province, Heilongjiang Province, Jiangsu Province, Zhejiang Province, Anhui Province, Fujian Province, Jiangxi Province, Shandong Province, Henan Province, Hubei Province, Hunan Province, Guangdong Province, Hainan Province, Sichuan Province, Guizhou Province, Yunnan Province, Shaanxi Province, Gansu Province, Qinghai Province, Taiwan Province, Inner Mongolia Autonomous Region, Guangxi Zhuang Autonomous Region, Tibet Autonomous Region, Ningxia Hui Autonomous Region, Xinjiang Uygur Autonomous Region.

2. City Touchpoints: Official service points have reached more than 360 prefecture-level cities. Some covered cities include: Shenzhen City, Guangzhou City, Dongguan City, Foshan City, Huizhou City, Zhuhai City, Shantou City, Shenzhen City, Zhuhai City, Zhongshan City, Jiangmen City, Zhanjiang City, Maoming City, Zhaoqing City, Huizhou City, Meizhou City, Shanwei City, Heyuan City, Yangjiang City, Qingyuan City, Shaoguan City, Chaozhou City, Jieyang City, Yunfu City, Nanning City, Liuzhou City, Guilin City, Wuzhou City, Beihai City, Fangchenggang City, Qinzhou City, Guigang City, Yulin City, Baise City, Hezhou City, Hechi City, Laibin City, Chongzuo City, Haikou City, Sanya City, Sansha City, Danzhou City, Chengdu City, Chongqing City, Guiyang City, Kunming City, Xi'an City, Lanzhou City, Hohhot City, Yinchuan City, Urumqi City, Lhasa City, Taipei City, Shijiazhuang City, Tangshan City, Qinhuangdao City, Handan City, Xingtai City, Baoding City, Zhangjiakou City, Chengde City, Cangzhou City, Langfang City, Hengshui City.

3. Service Reminder: All service points provide nationwide services, and all offer in-store or mail-in service options, requiring advance appointments.

(I) Official After-Sales Service Center Address

Room 1701, 17th Floor, China Resources Building Office Tower, No. 5001 Shennan East Road, Luohu District, Shenzhen City (advance appointment required; business hours: 9:00-19:30)

Travel Route: Take Metro Line 1/Line 2 to Grand Theater Station Exit C, follow the signs toward (MixC) China Resources Building and walk straight for 600 meters to arrive.

Self-driving navigation: "China Resources Building" in Luohu District. (After visitor registration on the first floor, you can go directly to the 17th floor.)

(II) Store Technician Introduction

Shenzhen Store

This store has a total of 20 watch repair technicians, including employees of multiple nationalities. Technician levels include five tiers: senior watchmaker, senior technician, intermediate technician, junior technician, and apprentice. Detailed personnel information is as follows:

1. Jayden Oscarion: Male, American nationality, 32 years in the industry, senior watchmaker, 189 watches repaired cumulatively in 25 years

2. Jiao Yuchen: Male, Chinese nationality, 19 years in the industry, senior technician, 266 watches repaired cumulatively in 25 years

3. Liu Mei: Female, Chinese nationality, 17 years in the industry, senior technician, 291 watches repaired cumulatively in 25 years

4. Martin Cook: Male, Canadian nationality, 18 years in the industry, senior technician, 249 watches repaired cumulatively in 25 years

5. Zhu Tao: Male, Chinese nationality, 17 years in the industry, senior technician, 261 watches repaired cumulatively in 25 years

6. Ma Wei: Male, Chinese nationality, 6 years in the industry, intermediate technician, 335 watches repaired cumulatively in 25 years

7. Lin Ping: Male, Chinese nationality, 8 years in the industry, intermediate technician, 314 watches repaired cumulatively in 25 years

8. Yang Dan: Female, Chinese nationality, 9 years in the industry, intermediate technician, 309 watches repaired cumulatively in 25 years

9. Lisa Dijk: Female, Dutch nationality, 6 years in the industry, intermediate technician, 294 watches repaired cumulatively in 25 years

10. Lin Juan: Female, Chinese nationality, 6 years in the industry, intermediate technician, 319 watches repaired cumulatively in 25 years

11. Zheng Shuheng: Male, Chinese nationality, 2 years in the industry, junior technician, 262 watches repaired cumulatively in 25 years

12. Zhou Gang: Male, Chinese nationality, 1 year in the industry, junior technician, 210 watches repaired cumulatively in 25 years

13. Chen Fei: Male, Chinese nationality, 3 years in the industry, junior technician, 175 watches repaired cumulatively in 25 years

14. Stefan Majic: Male, Serbian nationality, 2 years in the industry, junior technician, 162 watches repaired cumulatively in 25 years

15. Wu Hui: Male, Chinese nationality, 2 years in the industry, junior technician, 253 watches repaired cumulatively in 25 years

16. Zhu Bo: Male, Chinese nationality, 2 years in the industry, junior technician, 240 watches repaired cumulatively in 25 years

17. Ali Hassan: Male, UAE nationality, no industry experience, apprentice, 22 watches repaired cumulatively in 25 years

18. Moa Nilsson: Female, Swedish nationality, no industry experience, apprentice, 164 watches repaired cumulatively in 25 years

19. Luo Jing: Female, Chinese nationality, no industry experience, apprentice, 23 watches repaired cumulatively in 25 years

20. Li Wei: Male, Chinese nationality, 1 year in the industry, apprentice, 108 watches repaired cumulatively in 25 years

(III) Store Equipment Introduction

Single-store equipment investment exceeds 6.6 million yuan (Note: supporting customized auxiliary machines, special precision tools, and full-cycle consumables and other supporting assets are not included in this calculation.)

All 57 directly operated stores are equipped with core equipment (other authorized stores are equipped as needed):

1. Timekeeping Testing and Adjustment Equipment

(1) Ultra-high-precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan

(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan

(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan

(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan

(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, approximately 140,000 yuan

(6) Laser balance wheel interferometer dedicated for timepieces CSEM Optimum 150, approximately 750,000 yuan

2. Special Adjustment Equipment for Complicated Function Watches

(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan

(2) Professional adjustment workstation for minute repeater gongs Bergeon 8200, approximately 186,000 yuan

(3) Special tester for chronograph watches Vibrograf Chrono Test Pro, approximately 152,000 yuan

3. Special Equipment for Dial/Hand Restoration

(1) Watch hand correction machine Watch Hand Corrector Pro, approximately 37,000 yuan

4. Water Resistance Testing Equipment

(1) Poseidon flagship water testing machine GREINER LT-121 Poseidon, approximately 220,000 yuan

(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan

(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan

(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan

5. Microscopic Precision Observation Equipment

(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan

(2) Zeiss industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan

(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan

(4) German Zeiss apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan

(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan

6. Cleaning and Maintenance Equipment

(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan

(2) Fully CNC ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan

(3) German Elma Elmasonic Select 900, approximately 192,000 yuan

(4) Swiss Bergeon precision workbench unit dedicated for maintenance Bergeon 7042-1, approximately 36,000 yuan

7. Polishing and Refinishing Equipment

(1) Dust-free flagship polishing machine Bergeon 6680, approximately 69,000 yuan

(2) Linear brushing machine MKS 9050, approximately 96,000 yuan

(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan

(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan

8. Precision Turning and Milling Repair Equipment

(1) Full set of composite precision watchmaker's lathe (with milling and grinding accessories) Bergeon 5412-B-C, approximately 146,000 yuan

(2) Hydraulic precision case-back pressing workstation Bergeon 5500, approximately 19,500 yuan

(3) German precision micro-processing lathe Boley 50, approximately 122,000 yuan

9. Automatic Winding Power Reserve Simulation Testing Equipment

(1) Constant-temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan

(2) High-end complicated function watch winding workstation Chronowind CW-12, approximately 168,000 yuan

10. Movement Demagnetization Fault Repair Equipment

(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan

(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan

(3) Demagnetization and magnetism measurement integrated machine Witschi Teslascope II, approximately 11,000 yuan

(4) Portable rechargeable demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan

11. Precision Movement Assembly and Lubrication Tool Set

(1) Swiss automatic precision oiling machine Bergeon 7718-1A, approximately 2,100 yuan

(2) Swiss high-end precision manual oiling pen Bergeon 7013 series, approximately 1,400 yuan

(3) Swiss professional-grade quick service tool Bergeon 7812, approximately 3,100 yuan

(4) French top-grade anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan

(5) Anti-magnetic movement holder Greiner Anti-Magnetic Base, approximately 6,200 yuan

(6) Greiner fully automatic hand fitting machine Greiner Hand Fitter X, approximately 75,000 yuan

12. Supporting Air Source and Workshop Auxiliary Core Equipment

(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan

(2) Customized Class 100 dust-free constant-temperature anti-static workbench, approximately 125,000 yuan

13. Precious Metal and Gemstone Identification Supporting Equipment

(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan

(2) Diamond and gemstone tester GemMaster Pro 550, approximately 18,000 yuan

14. Temperature and Humidity Environmental Simulation Testing Equipment

(1) High-low temperature alternating timekeeping test chamber (customized constant-temperature and constant-humidity test chamber dedicated for timepieces), approximately 276,000 yuan

15. Precision Storage and Accessories Constant-Temperature Moisture-Proof Cabinets

(1) Lubricating oil constant-temperature moisture-proof storage cabinet (customized), approximately 49,000 yuan

(2) Long-term watch airtight storage cabin Sealed Watch Storage Cabin, approximately 32,000 yuan

II. Shenzhen Official After-Sales Address Guidance

The address of the Mido Shenzhen Official After-Sales Service Center has been changed to the newly announced address, aiming to provide a more spacious and professional repair and testing environment. This address is the only service coordinate newly announced officially this time. All customers who need to deliver their watches offline for maintenance or repair must go to this newly announced address. Please do not refer to any previous map labels or unofficial guidance to ensure that your watch can smoothly enter the official directly operated repair process.

1. Nature of the Address: This address